product description...


dynamix 1000 va ups. smart software and rs232 cable included. 4x nz power sockets on the rear. 2 year warranty. serial only no usb support.

ups1000cl specification

1) power: 1000va/600w

2) led display

3) line interactive

4) cpu control

5) avr function

6) input voltage range: 165vac-275vac±3%(90vac-140vac±3% for 110/120vac input)

7) normal input voltage: 220/230/240vac(110/120vac optional)

8) input frequency: 50/60 hz±5%

9) max input current:5.0a

10) nominal output volatge: 220/230/240vac(110/120vac optional)

11) max output current: 4.5a

12) output voltage range(normal mode):220/230/240vac±10%-15%(110/120vac optional)

13) output voltage range(battery mode): 220/230/240vac±10%(110/120vac optional, step wave)

14) output frequency (normal node) : synchronized ( sine wave)

15) output frequency (battery node) : 50/60hz±0.5%

16) overload capacity: 110-120% (60 seconds )

17) wave form: step wave

18) power factor: 0.6

19) efficiency: >80%

20) transfer time : <10ms

21) battery type: maintenance-free sealed lead-acid battery, leakproof

22) included battery modules: 2x12vdc/7.0ah

23) battery runtime: full load; 3 minutes, half load; 10 minutes

24) charge time: <12 hours (90%)

25) lcd status display: normal,fault,battery,charge,overload,load,battery capacity

26) audible alarm: ac unusual/battery low voltage/overload/short circuit/pcb failed, beep for 60 seconds

27) interface port(s): rs-232 optional.

28) control software: rups2000 optional.

29) cold-start capability

30) surge protection and filtering: high voltage, low voltage, surge, spike.

31) over load protection

32) battery low voltage protection