technical specifications protocol/standards • homeplug 1.0 specification, ieee 802.3 10/100 ethernet (10 mbps) and ieee 802.3u fast ethernet compliant (100 mbps) • integrated physical layer (phy) and media access controller (mac) • 10/100 mbps automdi/mdix support • 85 mbps homeplug 1.0 compatible modulation support • ofdm 256/64/16, dqpsk, dbpsk and robo modulation scheme quality of service • forward error correction (fec) support • channel adaptation ensures that signal integrity is maintained even under harsh noise environment • csma/ca with prioritisation and automatic repeat request (arq) for reliable delivery of ethernet packets via packet encapsulation • four level prioritised random access method • segment bursting and contention-free access ensures high throughput while maintaining low latency response and jitter performance frequency band • 4.3mhz ~ 20.9mhz security support • 56-bit des encryption with key management for secure powerline communications (use windows platform to enable encryption) platform support • windows 98se, me, 2000 or xp • os independent with tcp/ip protocol installed power supply • switch mode 90v ~ 240v led indicators • 1 x power led • 1 x powerline activity status led • 1 x ethernet link/activity status led external connectors • 1 x electrical power plugs • 1 x rj45 for 10/100 ethernet (automdi/mdi-x) environmental conditions • operating temperature 0 ~ 50°celsius • relative humidity 5 ~ 90% (non-condensing) approvals • c-tick minimum system requirements: • windows operating systems: microsoft windows (98se, me 2000 or xp pc system) with ethernet connection, pentium ii 300 mhz mmx-compatible pc or greater, minimum 64mb hard disk space and memory, cd-rom drive • maximum of 15 devices connected to power line network • all turbo homeplugs must be on the same power circuit package contents • 2 x np285 turbo homeplug adaptors • 2 x rj45 10/100 ethernet cables • 1 x configuration/manual cd • 1 x quick start guide - on cd |